Notice:
Some shipments may be delayed due to the ongoing supply chain disruptions and chip manufacturing shortages caused by the pandemic.

 If you have an order or shipping question please contact us at help@mrobotics.io. Thank you for your continued support.

Home > UAVs/Drones > Sensors
Choose a sub category:
GPS UAVCAN Power
Pressure RF
Sort By:
Page of 1
mRo u-Blox ZED-F9 RTK L1/L2 GPS mRo u-Blox ZED-F9 RTK L1/L2 GPS

The mRo ZED-F9 GPS is a high-performance device capable of simultaneously using all constellations, including the more precise L2 band, making it the most precise GPS available today. Under the right conditions, it is capable of 2cm precision.

Our Price: $490.00
mRo Location One GPS w/ Compass and Barometer mRo Location One GPS w/ Compass and Barometer

The mRo Location One is a multi-constellation GNSS powered by the new uBlox M9N module. Contains RM3100 magnetic compass, RGB Status LED, and push "Arm" safety button. Designed for all UAVCAN compatible platforms.

Our Price: $161.90
mRo KitCAN mRo KitCAN

The mRo KitCAN features a powerful kit of hardware+firmware via CAN that tackles most of the robotic applications out there.

Our Price: $74.90
mRo GPS u-Blox Neo-M9N - IST8308 (Ultra-Robust) mRo GPS u-Blox Neo-M9N - IST8308 (Ultra-Robust)

Extremely powerful GPS + Compass system capable of using multiple constellations at the same time in order to provide you with a super+combo+awesome accurate position and heading.

Our Price: $70.90
mRo SAM GPS + IST8308 Mag (Medium Size) M10038 mRo SAM GPS + IST8308 Mag (Medium Size) M10038

This is the next-generation mid-size uBlox SAM GPS module. A nice balance between size and sensitivity.

Our Price: $66.90
u-Blox Neo-M8N Dual Compass LIS3MDL+IST831 mRo GPS u-Blox Neo-M8N Dual Compass LIS3MDL+ IST8308

Extremely powerful GPS + Compass system capable of using multiple constellations at the same time in order to provide you with a super+combo+awesome accurate position and heading.

Our Price: $66.90
mRo SAM GPS + IST8308 Mag (Full Size) M10037 mRo SAM GPS + IST8308 Mag (Full Size) M10037

This is our latest uBlox SAM GPS module with the Temp-Comp/Low drift IST8308 compass.

Our Price: $65.90
mRo GPS u-Blox Neo-M8N / 3DR SOLO Upgrade mRo GPS u-Blox Neo-M8N / 3DR SOLO Upgrade

Extremely powerful GPS system capable of using multiple constellations. 3DR Solo Compatible.

Our Price: $63.90
mRo CAN Node F303 mRo CAN Node F303

Convert any legacy GPS/Compass device supported by Ardupilot to CAN, for a robust and simplified long-distance data tramission.

Our Price: $60.90
mRo SiK Telemetry Radio V2 915Mhz mRo SiK Telemetry Radio V2 915Mhz

A SiK Telemetry Radio is a small, light, and inexpensive open-source radio platform that typically allows ranges of better than 300m “out of the box”.

Our Price: $59.90
mRo SiK Telemetry Radio V2 433Mhz mRo SiK Telemetry Radio V2 433Mhz

A SiK Telemetry Radio is a small, light, and inexpensive open-source radio platform that typically allows ranges of better than 300m “out of the box”.

Our Price: $59.90
mRo I2C Airspeed Sensor JST-GH - MS4525DO mRo I2C Airspeed Sensor JST-GH - MS4525DO

The mRo Classic Digital airspeed sensor is equipped with a Measurement Specialties 4525DO sensor.

Our Price: $53.90
mRo Hall Sens Power Module ACSP7 (Next Gen) mRo Hall Sens Power Module ACSP7 (Next Gen)

The mRo ACSP7 is the next-generation, non-invasive power module for Ardupilot/PX4-based autopilots.

Our Price: $47.90
mRo Power Zero mRo Power Zero

The mRo Power Zero is the new high quality power module standard. Extremely accurate current measurements across the entire current operating range. Hall effect current sensor and high precision voltage dividing circuit for consistent and reliable measurements.

Our Price: $43.90
AUAV Power Module (ACSP4) 10S-LIPO 5V&12V Output AUAV Power Module (ACSP4) 10S-LIPO 5V&12V Output

AUAV signature Ultra-Low Noise power supply with current and voltage sensing as well as Power Distribution layout. Handles 10S LIPOs.

Our Price: $39.90
mRo SiK Telemetry Radio V2 Air/Ground Bundle mRo SiK Telemetry Radio V2 Air/Ground Bundle

mRo SiK Telemetry Radio V2 Air/Ground Bundle includes two radios. The small version goes in your air vehicle and the "big" one plugs into ground station via the USB connector.

Our Price: $38.90
mRo SiK Air Telemetry Radio V2 mRo SiK Air Telemetry Radio V2

The mRo SiK Air Telemetry Radio V2 is the smaller, lightweight version of the standard mRo SiK Telemetry Radio V2.

Our Price: $34.90
AUAV Power Module (ACSP5) 10S-LIPO AUAV Power Module (ACSP5) 10S-LIPO

AUAV signature Ultra-Low Noise power supply with current and voltage sensing as well as a micro-sized layout. Handles 10S Lipos.

Our Price: $34.90
Pitot Tube Set Pitot Tube Set

Pitot tube replacement set. These items are used in combination with a differential pressure sensor to sense airspeed.

Our Price: $29.90
mRo Classic Power Module (BEC) 4S LIPOs mRo Classic Power Module (BEC) 4S LIPOs

The mRo Classic Power Module (BEC) is based on the 3DR Power Module featuring the new 6-position, JST-GH standard connector.

Our Price: $25.90
mRo Super EMI Absorber/Shield mRo Super EMI Absorber/Shield

mRo Super EMI absorbers consist of insulation layers, shielding layers, absorbing layers, and nonconductive pressure-sensitive adhesives developed by 3M.

Our Price: $24.90
mRo USB FTDI Serial to JST-GH (Basic) mRo USB FTDI Serial to JST-GH (Basic)

The mRo USB FTDI Serial to 6-pin JST-GH is a must-have item that allows you to quickly interface with serial accessories used on most drones like Telemetry radios, GPSs, OSDs, and other devices.

Our Price: $17.90
mRo WiFi Module V1.0 - ESP8266 mRo WiFi Module V1.0 - ESP8266

The mRo WiFi radio is developed around the very popular ESP8266 module used in many IoT projects. The mRo WiFi module V1.0 comes with a standard JST-GH, allowing you to establish an UDP connection with your computer or mobile device and use mobile ground stations.

Our Price: $16.90
mRo JST-GH GPS Port to I²C Bus Splitter mRo JST-GH GPS Port to I²C Bus Splitter

The mRo JST-GH GPS port to I²C Bus Splitter is a fantastic way to branch out your I²C signal from your GPS cable.

Our Price: $9.90
Purple GPS 3D-Printed Case Purple GPS 3D-Printed Case

High Quality, Lightweight, PLA GPS enclosure with inserts and screws for our signature Purple GPS.


Our Price: $4.90