 |
[Assembled, tested, and shipped from California]
For quotes on large orders and lead times, please send your inquiry to help@mrobotics.io or call us at 619-503-1003.
Due to the high amount of requests, we decided to make an early release of the versatile mRo Nano Talon UAV. We are still working on the documentation and support for this platform, so for the moment, it is recommended only for advanced/expert users. If you need shipping ETA or special requests, please email us at help@mrobotics.io.
Specs/Included:
- Brand Name: ZOHD
- Item Name: Nano Talon
- Wingspan: 860mm/33.85in
- Length: 570mm/22.44in
- Rudder: Yes (V-tail)
- Aileron: Yes
- Flying Weight: 361g(w/o FPV gear,Battery)
- Material: Crash Resistant EPP
- CG: 3.5cm from the wing leading edge(mark under the wing)
- Color: White + Black
- Motor: ZOHD 2204 1870KV BL
- Motor Shaft Diameter: 5mm
- ESC: 30A W/1A BEC(XT60 connector)
- Servos: 3x 8g Digital Servo
- Propeller: 6x3 Inch
- Battery: LiPo 3S 1300mAh 45C
- Recommend Radio: ≥6CH
- Flying speed: 12 to 90km/h
- Easy access to Autopilot via side USB port
- FPV Frontal Camera: 1200TVL CMOS 2.8mm 120 Degree PAL/NTSC 5V-12V
- FPV Transmitter: 5.8G 40CH 25MW/200MW/600MW Switchable AV Wireless RP-SMA Female
- FPV TX Antenna: 5.8GHz 5DBi High Gain Circular Polarized Four Leaf Clover Antenna
- Airspeed Sensor: mRo Next-Gen MS5525 Airspeed Sensor
- Pitot-Static: mRo Pitot tube set (Tubbing, pitot, cable JST-GH to 4-Pins JST-GH)
- Autopilot: mRo x2.1 Rev 2 with straight pins soldered ArduPilot PX4 Compatible
- GPS+Compass: mRo GPS u-Blox Neo-M8N Dual Compass LIS3MDL+ IST8310
- Power Module: mRo Power Module (ACSP5) 10S-LIPO, big cap soldered, JST-GH to 6-Pins JST-GH
- Telemetry: mRo SiK Telemetry Radio V2 Air/Ground Bundle 915Mhz (with cables included, JST-GH to 6-Pins JST-GH)
Recommended: - LiPo 4S Charger
- FPV 5.8Ghz Receiver or FPV Goggles w/ build-in 5.8G RX
- R/C Transmitter with S.Bus, PPM or Spektrum protocol output.
|
|
 |