mRo X2.1-777

[Assembled, Tested, Supported, & Shipped from California]

All Bundles are shipping now!

The mRo X2.1-777 is the reduced version of PixHawk1 with better sensors and more flexibility. This board will "work out of the box" with PX4 and Ardupilot. Populated with the extremely powerful STM32F777 microcontroller.

With mRo you don't have to buy and pay for an autopilot pilot that includes cables and accessories that you might not use. Maybe you need a bare board for a replacement, maybe you don't need the pin headers soldered, maybe you want to save time, maybe you need everything, who knows? We give you the flexibility to choose what you really need/want and save some money in the way, we won't judge!

Minimal Bundle Option Includes:
1 x USB Micro Cable
1 x MRC0253 150mm USB Micro to [4 Pins JST-GH]
2 x MRC0206 150mm for GPS/Telemetry Radios
1 x MRC0251 100mm X2.1 for Power module

Basic Bundle option includes:
1 x SanDisk Ultra micro SD Card (8GB)
1 x USB Micro Cable
1 x MRC0253 150mm USB Micro to [4 Pins JST-GH]
2 x MRC0206 150mm for GPS/Telemetry Radios
1 x MRC0205 100mm [4 Pins JST-GH] cable for I2C Accessories
1 x MRC0250 150mm X2.1 for Safety Switch and Status LED
1 x MRC0251 100mm X2.1 for Power module
1 x MRC0252 150mm X2.1 for Buzzer

Developer/Advanced Bundle option includes:
1 x SanDisk Ultra micro SD Card (8GB)
1 x USB Micro Cable
1 x MRC0253 150mm USB Micro to [4 Pins JST-GH]
2 x MRC0206 150mm for GPS/Telemetry Radios
1 x MRC0205 100mm [4 Pins JST-GH] cable for I2C Accessories
1 x MRC0250 150mm X2.1 for Safety Switch and Status LED
1 x MRC0251 100mm X2.1 for Power module
1 x MRC0252 150mm X2.1 for Buzzer
1 x MRC0221 150mm [4 Pins JST-GH] to [4 2.54mm Female Headers] for programming
2 x MRC0202 150mm [6 Pins JST-GH] to [6 2.54mm Female Headers] for multiple solutions
1 x Servo connector to Spektrum Satelite

Microprocessor:

32-bit STM32F777 Cortex M4 core with FPU

216 MHz/512 KB RAM/2 MB Flash

32 bit STM32F103 failsafe co-processor

Sensors:

Invensense ICM-20602 3-axis accelerometer/gyroscope

Invensense MPU-9250 3-axis accelerometer/gyroscope/magnetometer

MEAS MS5611 barometer

Interfaces:

5x UART (serial ports), 2x with HW flow control.

1x CAN

Spektrum DSM / DSM2 / DSM-X® Satellite compatible input up to DX8 (DX9 and above not supported)

Futaba S.BUS® compatible input and output

PPM sum signal

RSSI (PWM or voltage) input

I2C® (Via GPS port)

SPI

2 x ADC inputs

Externally mounted microUSB port

Resources:

-Docs
-3D Files (Step)
-Wiki