Home > All >

mRo Control Zero F7
mRo Control Zero F7


 
Alternative Views:


To buy this product, please proceed to our official reseller store
Our Price: $349.90
Harmonized Tariff Code: 9014.20.4000
ECCN: 9A012.b.2

Quantity in Stock:(Out of Stock)


Availability:: Discontinued Replaced by mRo Control Zero H7
Product Code: MRO-CTRL-ZERO-F7
Qty:

Description
 

*mRo Control Zero F7 has been replaced by mRo Control Zero H7*



For quotes on large orders and lead times, please send your inquiry to help@mrobotics.io


The Control Zero series of flight controllers from mRo is our commitment to continuous improvement. Our goal with this series was to take every lesson learned from our 10+ years of flight controller design and make the best pro-consumer / commercial flight controller on the market. Our journey begins with this Zero; this is a no-compromises triple IMU commercial grade flight controller. It includes 8x PWM outputs (DShot capable), 3x IMUs, 1x Magnetometer, 1x Barometric Pressure Sensor (Altimeter), 6x UART, and an SD Card, all packed into a 32mm x 20mm PCB. The PWMs are bidirectional, EMI protected, and level-shifted to 5V logic levels. All accessed through front and rear 30pin Molex PicoClasp connectors. A durable aluminum case, conformal board coating, and optional temperature calibration included.


Currently Flying with Ardupilot and PX4


What is inside the box and Quick Start:
https://mrobotics.io/mrocontrolzero/

Specifications:

32-bit
STM32F777 Cortex M4 core with FPU rev. 3 216 MHz/512 KB RAM/2 MB Flash
F-RAM Cypress MF25V02-G 256-Kbit nonvolatile memory (Flash memory that performs as fast as RAM)

Bosch BMI088 3-axis accelerometer/gyroscope (internally vibration dampened)
Invensense ICM-20602 3-axis accelerometer/gyroscope
Invensense ICM-20948 3-axis accelerometer/gyroscope/magnetometer
Infineon DPS310 barometer (So smooth and NO more light sensitivity)

Spektrum DSM / DSM2 / DSM-X® Satellite compatible input and binding
Futaba S.BUS® & S.BUS2® compatible input
FRSky Telemetry port output
Graupner SUMD
Yuneec ST24
PPM sum input signal
8x PWM outputs (all DShot capable)
1x RSSI (PWM or voltage) input
6x UART (serial ports total), 3x with HW flow control, 1x FRSky Telemetry (D or X types), 1x Console and 1x GPS+I2C
1x I2C
1x SPI
1x CAN
1x JTAG (TC2030 Connector)
3x
Ultra low noise LDO voltage regulator
Tricolor LED


Uncased Weight and Dimensions:
Weight: 5.3g (.19 oz)
Width: 20mm (.79”)
Length: 32mm (1.26”)

USER GUIDE

Click here for quick Start and User Guide

[Made in USA]

mRo Control Zero in Action

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 1 Write a review »

  1 of 1 people found the following review helpful:
 
5 of 5 Great flight controller October 30, 2020
Reviewer: David Chaim from Trieste, Trieste Italy  
Small size but at the same time powerful,  can be mount in small frames but also big frames...,without sacrifie the optional hardware you want mount.


Was this review helpful to you?